Keysight M8195A - Instrument:memory:extended:rdivider [?] DIV1|DIV2|DIV4; Instrument:mmodule:config

6 General Programming
198 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
6.11.6 :INSTrument:MEMory:EXTended:RDIVider [?] DIV1|DIV2|DIV4
Command
:INST:MEM:EXT:RDIV[?]
Long
:INSTrument:MEMory:EXTended:RDIVider[?]
Parameters
DIV1|DIV2|DIV4
 DIV1 – Memory sample rate is the DAC Sample Rate.
 DIV2 – Memory sample rate is the DAC Sample Rate divided by 2.
 DIV4 – Memory sample rate is the DAC Sample Rate divided by 4.
Parameter Suffix
None
Description
Use this command or query to set or get the Sample Rate Divider of the Extended
Memory. This value determines also the amount of available Extended Memory for
each channel (see section 1.5.5).
Example
Command
:INST:MEM:EXT:RDIV DIV4
Query
:INST:MEM:EXT:RDIV?
6.11.7 :INSTrument:MMODule:CONFig?
Command
:INST:MMOD:CONF?
Long
:INSTrument:MMODule:CONFig?
Parameters
None
Parameter Suffix
None
Description
This query returns the state of the multi-module configuration mode (0: disabled, 1:
enabled).
Example
Query
:INST:MMOD:CONF?