Keysight M8195A - Launching the M8195 A Soft Front Panel

2 M8195A User Interface
38 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
2.2 Launching the M8195A Soft Front Panel
There are three ways to launch the M8195A Soft Front Panel:
 Select Start > All Programs > Keysight M8195 > Keysight M8195 Soft Front
Panel from the Start Menu.
 From the Keysight Connection Expert select the discovered M8195 module,
right-click to open the context menu and select “Send Commands To This
Instrument”.
 From the Keysight Connection Expert select the discovered M8195 module,
select the “Installed Software” tab and press the “Start SFP” button.
The following screen will appear:
Figure 7: M8195A connected to PC