Keysight M8195A - Initiate:immediate[1|2|3|4]; Arm[:Sequence][:Start][:Layer]:Trigger:level[?] <Level>|Minimum|Maximum

6 General Programming
184 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
6.8.7 :INITiate:IMMediate[1|2|3|4]
Command
:INIT:IMM[1|2|3|4]
Long
:INITiate:IMMediate[1|2|3|4]
Parameters
None
Parameter Suffix
None
Description
Start signal generation on all channels. The channel suffix is ignored.
Example
Command
:INIT:IMM
6.8.8 :ARM[:SEQuence][:STARt][:LAYer]:TRIGger:LEVel[?] <level>|MINimum|MAXimum
Command
:ARM:TRIG:LEV[?]
Long
:ARM:TRIGger:LEVel[?]
Parameters
<level>|MINimum|MAXimum
Parameter Suffix
None
Description
Set or query the trigger input threshold level.
 <level> – Threshold level voltage.
Example
Command
:ARM:TRIG:LEV 3e-9
Query
:ARM:TRIG:LEV?