Keysight M8195A - Trigger[:Sequence][:Start]:Enable:hwdisable[:State][?] 0|1|OFF|ON; Trigger[:Sequence][:Start]:Begin:hwdisable[:State][?] 0|1|OFF|ON

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 189
6.8.16 :TRIGger[:SEQuence][:STARt]:ENABle:HWDisable[:STATe][?]
0|1|OFF|ON
Command
:TRIG:ENAB:HWD[?]
Long
:TRIGger:ENABle:HWDisable[?]
Parameters
0|1|OFF|ON
Parameter Suffix
None
Description
Set or query the hardware input disable state for the enable function. When the
hardware input is disabled, an enable event can only be generated using the
:TRIGger[:SEQuence][:STARt]:ENABle[:IMMediate] command. When the hardware
input is enabled, an enable event can be generated by command or by a signal
present at the trigger or event input.
Example
Command
:TRIG:ENAB:HWD ON
Query
:TRIG:ENAB:HWD?
6.8.17 :TRIGger[:SEQuence][:STARt]:BEGin:HWDisable[:STATe][?]
0|1|OFF|ON
Command
:TRIG:BEG:HWD[?]
Long
:TRIGger:BEGin:HWDisable[?]
Parameters
0|1|OFF|ON
Parameter Suffix
None
Description
Set or query the hardware input disable state for the trigger function. When the
hardware input is disabled, a trigger can only be generated using the
:TRIGger[:SEQuence][:STARt]:BEGin[:IMMediate] command. When the hardware
input is enabled, a trigger can be generated by command, by a signal present at the
trigger input or the internal trigger generator.