Keysight M8195A - System:license:extended:list; System:set[?]

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 161
6.5.4 :SYSTem:LICense:EXTended:LIST?
Command
:SYST:LIC:EXT:LIST?
Long
:SYSTem:LICense:EXTended:LIST?
Parameters
None
Parameter Suffix
None
Description
This query lists the licenses installed.
Example
Query
:SYST:LIC:EXT:LIST?
6.5.5 :SYSTem:SET[?]
Command
:SYST:SET[?]
Long
:SYSTem:SET[?]
Parameters
<binary block data>
Parameter Suffix
None
Description
In query form, the command reads a block of data containing the instrument’s
complete set-up. The set-up information includes all parameter and mode settings,
but does not include the contents of the instrument setting memories or the status
group registers. The data is in a binary format, not ASCII, and cannot be edited.
In set form, the block data must be a complete instrument set-up read using the
query form of the command.
This command has the same functionality as the *LRN command.
Example
Command
:SYST:SET <binary block data>
Query
:SYST:SET?