Keysight M8195A - Run Status Subsystem

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 179
6.7.10 Run Status Subsystem
The Run Status register contains the run status conditions of the individual channels.
The following SCPI commands and queries are supported:
:STATus:OPERation:RUN[:EVENt]?
:STATus:OPERation:RUN:CONDition?
:STATus:OPERation:RUN:ENABle[?]
:STATus:OPERation:RUN:NTRansition[?]
:STATus:OPERation:RUN:PTRansition[?]
Table 30: Run status register
Bit Number
Decimal Value
Definition
0 Run Status
1
Indicates if channel 1 is running
1 Run Status
2
Indicates if channel 2 is running
2 Run Status
4
Indicates if channel 3 is running
3 Run Status
8
Indicates if channel 4 is running