Keysight M8195A - Example Correction Files; Example Custom Modulation Files; Example Signal Studio File

7 Examples
262 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
7.4 Example Correction Files
The subfolder “CorrectionFiles” contains examples to be used in the SFP Multi-Tone
and Complex Modulation panels.
7.5 Example Custom Modulation Files
The subfolder “CustomModulationFiles” contains examples to be used in the SFP
Complex Modulation panel.
7.6 Example Signal Studio File
The below commands import the samples and markers from the Signal Studio file,
up-convert them to a carrier frequency of 2GHz and start signal generation. The
samples in the file are resampled from the sample frequency taken from the file
header to the sample frequency currently configured in the M8195A.
:carr:freq 2e9
trac:imp 1,"C:\Program Files
(x86)\Keysight\M8195\Examples\WaveformDataFiles\IEEE802_11ac_
160MHz_5250MHz.wfm",LIC,BOTH,ON
init:imm