Keysight M8195A - Arm[:Sequence][:Start][:Layer]:Trigger:operation[?] Asynchronous|Synchronous; Arm[:Sequence][:Start][:Layer]:Event:level[?] <Level>|Minimum|Maximum

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 187
6.8.12 :ARM[:SEQuence][:STARt][:LAYer]:TRIGger:OPERation[?]
ASYNchronous|SYNChronous
Command
:ARM:TRIG:OPER[?]
Long
:ARM:TRIGger:OPERation[?]
Parameters
ASYNchronous|SYNChronous
Parameter Suffix
None
Description
Set or query the operation mode for the trigger and event input.
 ASYNchronous – asynchronous operation (see section 1.5.2)
 SYNChronous – synchronous operation (see section 1.5.2)
Example
Command
:ARM:TRIG:OPER SYNC
Query
:ARM:TRIG:OPER?
6.8.13 :ARM[:SEQuence][:STARt][:LAYer]:EVENt:LEVel[?] <level>|MINimum|MAXimum
Command
:ARM:EVEN:LEV[?]
Long
:ARM:EVENt:LEVel[?]
Parameters
<level>|MINimum|MAXimum
Parameter Suffix
None
Description
Set or query the input threshold level.
 <level> – Threshold level voltage.
Example
Command
:ARM:EVEN:LEV 2e-9
Query
:ARM:EVEN:LEV?