Keysight M8195A - :ARM;TRIGger Subsystem

6 General Programming
180 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
6.8 :ARM/TRIGger Subsystem
6.8.1 :ABORt[1|2|3|4]
Command
:ABOR[1|2|3|4]
Long
:ABORt[1|2|3|4]
Parameters
None
Parameter Suffix
None
Description
Stop signal generation on all channels. The channel suffix is ignored.
Example
Command
:ABOR1
6.8.2 :ARM[:SEQuence][:STARt][:LAYer]:MDELay[?]
<module_delay>|MINimum|MAXimum
Command
:ARM:MDEL[?]
Long
:ARM[:SEQuence][STARt][:LAYer]:MDELay[?]
Parameters
{<delay> | MINimum | MAXimum}
Parameter Suffix
[s|ms|us|ns|ps]
Description
Set or query the module delay settings (see section 1.5.3) . The unit is in seconds.
Example
Command
:ARM:MDEL 1E-13
Query
:ARM:MDEL?