Keysight M8195A - Carrier Subsystem; Source]:Carrier[1|2|3|4]:Frequency[?] <Frequency>|Min|Max|Default; Source]:Carrier[1|2|3|4]:Scale[?] <Scale>|Min|Max|Default

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 237
6.20 CARRier Subsystem
6.20.1 [:SOURce]:CARRier[1|2|3|4]:FREQuency[?] <frequency>|MIN|MAX|DEFault
Command
CARR:FREQ[?]
Long
:CARRier:FREQuency[?]
Parameters
<frequency>
Parameter Suffix
Hz
Description
Set or query the carrier frequency used for the import of files of type LICensed.
Example
Command
:CARR1:FREQ 1e9
Sets the carrier frequency to 1.0 GHz.
Query
:CARR1:FREQ?
6.20.2 [:SOURce]:CARRier[1|2|3|4]:SCALe[?] <scale>|MIN|MAX|DEFault
Command
CARR:SCAL[?]
Long
:CARRier:SCALe[?]
Parameters
<scale> | MIN | MAX | DEF
Parameter Suffix
None
Description
Set or query the amplitude scale used for the import of files of type LICensed. The
amplitude scale is applied to the samples after up-conversion before they are written
to the AWG memory.