Keysight M8195A - Trac[1|2|3|4]:Comm[?]; Trac[1|2|3|4]:Sel[?]<Segment_Id>|Minimum|Maximum

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 257
6.21.19 :TRAC[1|2|3|4]:COMM[?]
Command
:TRAC[1|2|3|4]:COMM[?]
Long
:TRACe[1|2|3|4]:COMMent[?]
Parameters
<segment_id>,<comment>
Parameter Suffix
None
Description
This command associates a comment to a segment. The query gets the comment for
a segment.
 <segment_id> – the number of the segment
 <comment> – string of at most 256 characters
Example
Command
:TRAC:COMM 1, “Comment”
Query
:TRAC:COMM? 1
6.21.20 :TRAC[1|2|3|4]:SEL[?]<segment_id>|MINimum|MAXimum
Command
:TRAC[1|2|3|4]:SEL[?]
Long
:TRACe[1|2|3|4]:SELect[?]
Parameters
<segment_id>|MINimum|MAXimum
Parameter Suffix
None
Description
Selects the segment, which is output by the instrument in arbitrary function mode.
 <segment_id> – the number of the segment
The command has only effect, If the channel is sourced from Extended Memory. In
this case the same value is used for all other channels sourced from Extended
Memory.
Example
Command
:TRAC:SEL 5
Query
:TRAC:SEL?