Keysight M8195A - Trac[1|2|3|4]:Del:all; Trac[1|2|3|4]:Cat

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 255
6.21.15 :TRAC[1|2|3|4]:DEL:ALL
Command
:TRAC[1|2|3|4]:DEL:ALL
Long
:TRACe[1|2|3|4]:DELete:ALL
Parameters
None
Parameter Suffix
None
Description
Delete all segments. The command can only be used in program mode.
If the channel is sourced from Extended Memory, the same segment is deleted on all
other channels sourced from Extended Memory.
Example
Command
:TRAC:DEL:ALL
6.21.16 :TRAC[1|2|3|4]:CAT?
Command
:TRAC[1|2|3|4]:CAT?
Long
:TRACe[1|2|3|4]:CATalog?
Parameters
None
Parameter Suffix
None
Description
The query returns a comma-separated list of segment-ids that are defined and the
length of each segment. So first number is a segment id, next length …
If no segment is defined, “0, 0” is returned.
Example
Query
:TRAC1:CAT?