Keysight M8195A - Trac[1|2|3|4]:Mark[?]

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 259
6.21.23 :TRAC[1|2|3|4]:MARK[?]
Command
:TRAC[1|2|3|4]:MARK[?]
Long
:TRACe[1|2|3|4]:MARKer[?]
Parameters
OFF | ON | 0 | 1
Parameter Suffix
None
Description
Use this command to enable or disable markers for the selected segment. The query
form gets the current marker state.
The command has only effect, If the channel is sourced from Extended Memory. In
this case the same value is used for all other channels sourced from Extended
Memory.
Example
Command
:TRAC:MARK 1
Query
:TRAC:MARK?