1 Introduction
18 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
1.2 Options
For the M8195A Rev 2, following product options are available.
Table 3: Options provided by M8195A
1 channel, 65 GSa/s, 2 GSa per module
N/A (minimum configuration)
Must order either –001 or -002 or -004
2 channel, 65 GSa/s, 2 GSa per module
Must order either –001 or -002 or -004
4 channel, 65 GSa/s, 2 GSa per module
Must order either –001 or -002 or -004
Upgrade from one channel to two channels
Upgrade from two channels to four channels
Upgrade to 16 GSa per module
Fast switching per module
As a standard configuration, the M8195A contains 2 GSa of memory.
Option -001, -002,
or -004
With this option the number of channels is selected. The M8195A is available in a one
channel (-001), two channel (-002) or 4 channel (-004) version. A software upgrade
from one to two channels is possible by installing option U02. A software upgrade from
two to four channels is possible by installing option U04. In order to upgrade from one
to four channels, first option –U02 and next –U04 must be installed.
This option offers 16384 MSa (=16 GSa) waveform memory for the M8195A.
Option -16G is software upgradeable.
This option offers extensive sequencing capabilities. For more details, refer to the
chapter Sequencing.
Option -SEQ is software upgradeable.
This option enables the M8195A to externally select or step through segments or
sequences faster than every 500 μs.
Option -FSW is export controlled and is software upgradeable.
To Next Page
Loading...
