Keysight M8195A - :OUTPut Subsystem

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 207
6.13 :OUTPut Subsystem
6.13.1 :OUTPut[1|2|3|4][:STATe][?] OFF|ON|0|1
Command
:OUTP[?]
Long
:OUTPut[?]
Parameters
OFF|ON|0|1
Parameter Suffix
None
Description
Switch the amplifier of the output path for a channel on or off.
Example
Command
:OUTP ON
Query
:OUTP?
6.13.2 :OUTPut: ROSCillator:SOURce[?] INTernal|EXTernal|SCLK1|SCLK2
Command
:OUTP:ROSC:SOUR[?]
Long
:OUTPut:ROSCillator:SOURce[?]
Parameters
INTernal|EXTernal|SCLK1|SCLK2
Parameter Suffix
None
Description
Select which signal source is routed to the reference clock output:
 INTernal: the module internal reference oscillator
 EXTernal: the external reference clock from REF CLK IN with two variable
dividers
 SCLK1: DAC sample clock with variable divider and variable delay
 SCLK2: DAC sample clock with fixed divider