Keysight M8195A - Trac[1|2|3|4]:Data:bloc; Trac[1|2|3|4]:Imp

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 245
6.21.9 :TRAC[1|2|3|4]:DATA:BLOC?
Command
:TRAC:DATA:BLOC?
Long
:TRACe:DATA:BLOCk?
Parameters
<segment_id>,<offset>,<length>
Parameter Suffix
None
Description
This query returns the same data as the “:TRAC:DATA?” query, but in IEEE binary
block format.
 < segment_id > – id of the segment
 <offset> - offset from segment start in samples (marker samples do not
count) to allow splitting the transfer in smaller portions
 <length> - number of samples to read
Example
:TRAC:DATA:BLOC? 1, 0, 2560
6.21.10 :TRAC[1|2|3|4]:IMP
Command
:TRAC[1|2|3|4]:IMP
Long
:TRACe[1|2|3|4]:IMPort
Parameters
<segment_id>,
<file_name>,
TXT|BIN|BIN8|IQBIN|BIN6030|BIN5110|LICensed|MAT89600|DSA90000|CSV,
IONLy|QONLy|BOTH,
<marker_flag>,
[,ALENgth|FILL
[,<init_value>
[,<ignore_header_parameters>]]]