Keysight M8195A - Output: Roscillator:rcd2[?] <Reference_Clock_Divider2>|Minimum|Maximum; Output[1|2|3|4]:Dioffset[?] <Value>|Minimum|Maximum

General Programming 6
Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide 209
6.13.5 :OUTPut: ROSCillator:RCD2[?] <reference_clock_divider2>|MINimum|MAXimum
Command
:OUTP:ROSC:RCD2[?]
Long
:OUTPut:ROSCillator:RCD2[?]
Parameters
reference_clock_divider2|MINimum|MAXimum
Parameter Suffix
None
Description
Set or query the second divider of the external reference clock signal routed to the
reference clock output.
Example
Command
:OUTP:ROSC:RCD2 1
Query
:OUTP:ROSC:RCD2?
6.13.6 :OUTPut[1|2|3|4]:DIOFfset[?] <value>|MINimum|MAXimum
Command
:OUTP:DIOF[?]
Long
:OUTPut:DIOFfset[?]
Parameters
<value>|MINimum|MAXimum
Parameter Suffix
None
Description
Differential Offset: The hardware can compensate for little offset differences between
the normal and complement output. “<value>” is the offset to the calibrated optimum
DAC value, so the minimum and maximum depend on the result of the calibration. of
Example
Command
:OUTP:DIOF MAX
Query
:OUTP:DIOF?