Keysight N3300A - Specifications

71
A
Specifications
Table A-1 lists the specifications for the different load models. Specifications indicate warranted performance in
the 25°C ±5°C region of the operating temperature range. Specifications apply to normal and transient modes
unless otherwise noted.
Table A-1. Specifications
N3302A
N3303A
N3304A
N3305A
N3306A
N3307A
Input Ratings
Current
0 - 30 A
0 - 10 A
0 - 60 A
0 - 60 A
0 - 120 A
0 - 30 A
Voltage
0 - 60 V
0 - 240 V
0 - 60 V
0 - 150V
0 - 60V
0 - 150V
Maximum Power @ 40°C
1
150 W
250 W
300 W
500 W
600 W
250 W
Input Characteristic
Voltage
Max Power Contour
0
full
scale
OPERATING CONTOUR
0
DERATED CURRENT DETAIL
1
2
3
all specifications apply
slew rate limitations apply
Current Current
Voltage
(see Table A-2)
full
scale
full
scale
Specified Current @
Low Voltage Operation
2.0 V
30 A
10 A
60 A
60 A
120 A
30 A
1.5 V
22.5 A
7.5 A
45 A
45 A
90 A
22.5 A
1.0 V
15 A
5 A
30 A
30 A
60 A
15 A
0.5 V
7.5 A
2.5 A
15 A
15 A
30 A
7.5 A
0 V
0 A
0 A
0 A
0 A
0 A
0 A
1
Maximum continuous power available is derated linearly from 100% of maximum at 40°C, to 75% of maximum at 55°C.
Typical Minimum Operating Voltage @ Full Scale Current
N3302A
N3303A
N3304A
N3305A
N3306A
N3307A
Table A-1 states that maximum
current is available down to 2
volts. Typically, under normal
operating conditions, the load
can sink the maximum current
down to the following voltages:
1.2 V 1.2 V 1.2 V 1.4 V 1.4 V 1.4 V