Keysight N3300A - Front Panel Number Entry

Quick Reference - 1
13
Front Panel Number Entry
Enter numbers from the front panel as follows:
Use the Entry Scroll keys to adjust the input setting in Meter mode.
If CC is lit, the input current changes.
If CV is lit, the input voltage changes.
If CR is lit, the input resistance changes.
NOTE The input must be on for input values to change.
Use the Function keys and Entry keys to enter a new value
NOTE If you make a mistake use the Backspace key to delete the number, or press the Meter key to
return to the Meter mode.

Input

Input
Res
Current
Voltage
Enter
AND
AND
AND
Meter
Enter
7 8 9
4
5
6
1
2
3
0 .
Input
Input
E -
Clear Entry