Keysight N3300A - SCPI Programming Commands - At a Glance

Quick Reference - 1
17
SCPI Programming Commands - At a Glance
NOTE Most [optional] commands have been omitted for clarity. Refer to the Programming Guide for a complete
description of all programming commands.
ABORt
CALibrate
:DATA <n> [,<n>]
:IMON:LEVel <points>
:IPRog:LEVel <points>
:LEVel <points>
:PASSword <n>
:SAVE
:STATE <bool> [,<n>]
CHANnel | INSTrument
[:LOAD] <n>
INITiate
[:IMMediate]
:SEQuence[1] | :SEQuence2
:NAMe LIST | ACQuire
CONTinuous
:SEQuence1 <bool>
:NAMe LIST <bool>
INPut | OUTput
[:STATe] <bool>
:PROTection
:CLEar
:SHORt
[:STATe] <bool>
MEASure | FETCh
:ARRay
:CURRent?
:POWer?
:VOLTage?
[:SCALar]
:CURRent?
:ACDC?
:MAX?
:MIN?
:POWer?
:MAX?
:MIN?
:VOLTage?
:ACDC?
:MAX?
:MIN?
PORT0[:STATe] <bool>
PORT1[:LEVel] <n>
SENSe
:CURRent
:RANGe <n>
:SWEep
:OFFSet
:POINts <n>
:TINTerval <n>
:WINDow <type>
:VOLTage
:RANGe <n>
[SOURce:] CURRent
[:LEVel] <n>
:TRIG <n>
:MODE <mode>
:PROTection
[:LEVel] <n>
:DELay <n>
:STATe <bool>
:RANGe <n>
:SLEW
[:BOTH] <n>
:NEGative <n>
:POSitive <n>
:TLEVel <n>
FUNCtion | MODE
:MODE <mode>
LIST
:COUNt <
n>
:CURRent
[:LEVel] <n> {,<n>}
:POINts?
:RANGe <n> {,<n>}
:POINts?
:SLEW
[:BOTH] <n> {,<n>}
:POINts?
:NEGative <n> {,<n>}
: POSitive <n> {,<n>}
:TLEVel <n> {,<n>}
:POINts?
:DWELI <n> {,<n>}
:POINts?
:FUNCtion | MODE <mode>
:RESistance
[:LEVel] <n> {,<n>}
:POINts?
:RANGe <n> {,<n>}
:POINts?
:SLEW
[:BOTH] <n> {,<n>}
:POINts?
:NEGative <n> {,<n>}
: POSitive <n> {,<n>}
:TLEVel <n> {,<n>}
:POINts?
:STEP <step>
:TRANsient
[:STATe] <bool> {,<bool>}
:POINts?
:DCYCle <n> {,<n>}
:POINts?
:FREQuency <n> {,<n>}
:POINts?
:MODE <mode> {<mode>}
:POINts?
:TWIDth <n> {,<n>}
:POINts?