1. Access the LAN Settings menu.
Press the LAN Settings softkey.
Select Services to turn the various LAN services on or off.
With DHCP on, an IP address will automatically be set by the DHCP (Dynamic Host Configuration Protocol) when
you connect the instrument to the network, provided the DHCP server is found and is able to do so. DHCP also auto-
matically deals with the subnet mask and gateway address, if required. This is typically the easiest way to establish
LAN communication for your instrument. All you need to do is leave DHCP on. Contact your LAN administrator for
details.
Keysight EDU33210 Series User's Guide
43
To Next Page
Loading...
