Installation Note N9038-90037 3
Option RT1 - Real-Time Spectrum Analysis Upgrade
Option RT1 - Real-Time Spectrum Analysis Upgrade
This document provides detailed instructions for the installation of Real-Time Spectrum Analysis in
the N9038A MXE EMI Receiver. Please be sure to read this entire document before attempting to
perform this upgrade.
Prerequisites
There is one prerequisite that must be met before installing Option RT1 in an N9038A MXE EMI
Receiver. It is:
Options:
N9038A-B85 Analysis Bandwidth, 85 MHz
Instructions on how to verify that this prerequisite has been met prior to the installation of this
upgrade are included later in this document.
Products Affected: MXE N9038A
Requirements: See Prerequisites
To Be Performed By: (X) Keysight Service Center
(X) Advanced User
(X) User
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
1.0 Hour
0.0 Hours
0.0 Hours
To Next Page
Loading...
Need help?
General
