6 Installation Note N9038-90037
Option RT1 - Real-Time Spectrum Analysis Upgrade
Installation Instructions
License Key Retrieval and Installation
1. Plug the instrument into the ac power source and turn it on.
2. Follow the instructions on the enclosed License Entitlement Certificate to redeem the new
license keys for the instrument being upgraded.
3. Once the new license keys have been redeemed follow the installation instructions that come
with the licenses to install them into the instrument.
4. Once the licenses have been installed an acknowledgment of this such as seen in Figure 1 can
be expected.
Figure 1 License Key Installation Confirmation
5. After the new license keys have been installed cycle the power of the instrument.
6. Verify that the license keys have been installed by pressing System, Show, System and make
sure that the following options are present:
N9038A-RT1 Real-time analysis up to maximum BW, basic detection
N9038A-FT1 Frequency Mask Trigger >15 us signal duration
While only one license key file will be sent it will contain within it two license keys, one for the
Real-Time Spectrum Analysis application and one for Frequency Mask Triggering used in this
application.
To Next Page
Loading...
Need help?
General
