Installation Note N9048-90017 7
Option EXM, External Mixing Upgrade Kit
Top Brace Removal
Refer to Figure 2. To remove the top brace (1), use the T-10 driver to remove the twelve screws (3)
(0515-0372) attaching the top brace to the chassis. Remove the wire holddown (as shown in Figure
3). Remove and discard the fourteen screws (or sixteen with Option WF1) (4) (0515-1946)
attaching the top brace to the boards.
Figure 2 Top Brace Removal
To Next Page
Loading...
