3 Short-Range Comms & IoT Mode
3.3 LoRa (CSS) Demodulation Measurement
All Markers Off
Turns off all markers.
Remote Command
:CALCulate:LORA:MARKer:AOFF
Example
:CALC:LORA:MARK:AOFF
3.3.7.3 Peak Search
The controls on the peak search tab provide the users with a convenient way of
identifying the peaks of the signal.
When peak excursion and peak threshold are both off:
Peak Search, Continuous Peak Search, and maximum part of Pk-Pk Search will
search the trace for the point with the highest y-axis value that does not violate the
LO feedthrough rules. A rising and falling slope are not required for these three peak
search functions.
The remaining search functions Next Peak, Next Pk Right, etc. will only consider
trace points that have a rising and falling slope on the left and right respectively.
Short Range Comms & IoT Mode User's &Programmer's Reference 391
To Next Page
Loading...
