Introduction
This guide describes standard configurations, for the PNA (E836xC) and PNA-L (N5230A) Series
microwave network analyzers. This guide should be used with the Keysight Technologies, Inc. PNA
family data sheets for a complete description of these analyzers.
For applications, measurement accessories, and general accessories please see Keysight PNA Family
Network Analyzers Configuration Guide, part number 5990-7745EN.
Keysight offers the following options for all PNA family
network analyzers
Certification options
□ Commercial calibration certification with test data (Option UK6)
Complete set of measurements which tests unit to manufacturer’s published specifications. Includes
calibration label, calibration certificate, and data report. Conforms to ISO 9001.
□ ISO 17025 compliant calibration (Option 1A7)
Complete set of measurements which tests unit to manufacturer’s published specifications. Includes
calibration label, ISO 17025 calibration certificate, and data report, measurement uncertainties and
guardbands on all customer specifications. Conforms to ISO 17025 and ISO 9001.
□ ANSI Z540 compliant calibration (Option A6J)
Complete set of measurements which tests unit to manufacturer’s published specifications. Includes
pre- and post-adjustment data with measurement uncertainty information compliant to the ANSI/
NCSL Z540 standard.
Documentation
The PNA Series instruments are equipped with an Online Help system available within the instrument
in the following languages: English, Japanese, Chinese, German, Spanish, and French. Service guides
and the Online Help system are available on the web: www.na.tm.keysight.com/pna
Calibration Software Licenses
□ Perpetual license for built-in performance test software for Keysight inclusive
cal (Option 897)
Adds built-in performance testing and calibration software for self-maintainers. Requires additional
equipment. See the analyzer’s Service Guide for more information on equipment required.
□ Perpetual license for built-in performance test software for Standards compliant
cal (Option 898)
Adds built-in performance testing and calibration software for self-maintainers. Requires additional
equipment. See the analyzer’s Service Guide for more information on equipment required.
To Next Page
Loading...
