Keysight PNA Series - User Manual

Keysight Technologies
Antenna Test
Selection Guide

Keysight PNA Series Specifications

General

Number of Ports	2, 4
Impedance	50 Ω
Output Power Range	-55 dBm to +13 dBm (varies by model)
Dimensions	Varies by model
Weight	Varies by model
Power Requirements	100-240 VAC, 50/60 Hz
Storage Temperature	-40°C to 70°C

Summary

2. Overview of antenna applications using Keysight PNA Series network analyzers

High sensitivity

PNA/PNA-X analyzers offer excellent sensitivity with mixer-based architecture and adjustable IF bandwidths.

Far-field antenna measurements

Radar cross-section measurements

Broadband Solution Configuration

3. Antenna measurement design considerations

Transmit site configuration

Parameters to consider for optimum equipment selection in antenna measurement systems.

Dynamic range

Choosing a network analyzer

Receive site configuration with external mixing

Select the LO Source

Determining measurement speed

Option H11 - IF access

Setting up the PNA LO for an 8.33 MHz IF signal

4. Migrating from 8510;8530 to PNA network analyzer based systems

5. Antenna measurement components catalog

Microwave network analyzers

Measurement automation

Appendix 2: How to select PNA Series (PNA; PNA-X) IF BW with performance comparable to 8510

Appendix 3: How to configure an external source for use with a PNA Series