Need help?Do you have a question about the Keysight E5071C and is the answer not in the manual?
General| Dynamic Range | >123 dB (typical) |
|---|---|
| Number of Ports | 2 or 4 |
| Display | 10.4-inch color LCD |
| Impedance | 50 Ω |
| Frequency Resolution | 1 Hz |
Guides users through selecting frequency, ports, time base, and other configurations for the ENA.
Describes the ENA as an integrated network analyzer with key components like RF source and LCD.
Lists options for 2-port and 4-port test sets across various frequency ranges.
Details options for standard and high stability time bases for the ENA.
Covers choices between removable and standard hard disk drives for the ENA.
Includes options like frequency offset mode and time domain analysis for the ENA.
Lists optional accessories like rack mount kits and handle kits for the ENA.
Provides options for ISO 17025 and ANSI Z540 compliant calibration for the ENA.
Guides users through selecting cable sets, accessories, calibration, and warranty for the E5092A.
Describes the E5092A's role in multiport measurement configurations.
Details the 20 GHz switching test set option for the E5092A.
Lists options for cable and adapter sets for different E5071C options with the E5092A.
Covers optional accessories like rack mount and handle kits for the E5092A.
Provides options for ISO 17025 and ANSI Z540 compliant calibration for the E5092A.
Details coaxial and waveguide calibration kits and their types for measurements.
Describes available cable types and adapter sets for various connector interfaces.
Lists power limiters and DC blocks with their specifications for signal management.
Details amplifiers, attenuators, and RF/microwave switches for signal manipulation.
Lists recommended power meters and sensors for accurate calibration.
Covers system racks, interface cables, monitors, and printers for system integration.
To Next Page