Keysight E5071C User Manual

02 | Keysight | E5071C Network Analyzer - Conguration Guide
1. Order the 82357B USB/GPIB interface at the same time if you want to
control power meters with the E5071C. This will allow you to conduct
scalar mixer calibrations (SMC), power calibrations, or receiver calibra-
tions after power calibrations.
2. E5071C-TDR is a superset of E5071C-010. To add option TDR, you do not
need to have option 010 already installed; however, you can have both
option 010 and TDR installed in one instrument
3. Consider purchasing Keysight 20mm TORQUE WRENCH 8710-1764 for
NMD 3.5 mm(f) test port connector.
This configuration guide describes standard configurations, op-
tions, accessories and peripherals for the E5071C ENA network
analyzer. Refer to the ENA brochure for a complete description of
the ENA network analyzer and the E5092A configurable multiport
test set.
E5071C ENA Network Analyzer
The ENA is an integrated network analyzer with a two- or four-
port S-parameter test set, a synthesized RF source, a 10.4-inch
color LCD, and a hard disk drive. A 3-year return-to-Keysight
Technologies, Inc. service warranty is included with the each ENA
network analyzer.
Step 1: Select frequency range, number of test
ports, and with or without bias tees
Up to 4.5 GHz range
9 kHz to 4.5 GHz (without bias tees)
E5071C-240 2-port S-parameter test set
E5071C-440 4-port S-parameter test set
100 kHz to 4.5 GHz (with bias tees)
E5071C-245 2-port S-parameter test set
E5071C-445 4-port S-parameter test set
Up to 6.5 GHz range
9 kHz to 6.5 GHz (without bias tees)
E5071C-260 2-port S-parameter test set
E5071C-460 4-port S-parameter test set
100 kHz to 6.5 GHz (with bias tees)
E5071C-265 2-port S-parameter test set
E5071C-465 4-port S-parameter test set
Up to 8.5 GHz range
9 kHz to 8.5 GHz (without bias tees)
E5071C-280 2-port S-parameter test set
E5071C-480 4-port S-parameter test set
100 kHz to 8.5 GHz (with bias tees)
E5071C-285 2-port S-parameter test set
E5071C-485 4-port S-parameter test set
Up to 14 GHz range
3
300 kHz to 14 GHz (with bias tees)
E5071C-2D5 2-port S-parameter test set
E5071C-4D5 4-port S-parameter test set
Up to 20 GHz range
3
300 kHz to 20 GHz (with bias tees)
E5071C-2K5 2-port S-parameter test set
E5071C-4K5 4-port S-parameter test set
Step 2: Select time base
E5071C-1E5 High stability time base
E5071C-UNQ Standard stability time base
Step 3: Select hard disk drive
E5071C-017 Removable hard disk drive
E5071C-019 Standard hard disk drive
Step 4: Choose additional options (Optional)
E5071C-008
1
Frequency offset mode
E5071C-TDR
2
Enhanced time domain analysis
E5071C-010 Time domain analysis
E5071C-790 Measurement Wizard Assistant software
Step 5: Choose accessories (Optional)
E5071C-1CM Rack mount kit,
E5071C-1CN Front handle kit
E5071C-1CP Rack mount and front handle kit
E5071C-810 Adds a keyboard
E5071C-820 Adds a mouse
Step 6: Choose certification documentation
(Optional)
E5071C-1A7 ISO 17025 compliant calibration
E5071C-A6J ANSI Z540 compliant calibration
Step 7: Choose your warranty service
(Optional)
5 year return-to Keysight warranty and service
Documentation
The documentation for the E5071C is located in the
Online Help system for the E5071C ENA network analyzer.
The ENA Service Guide and Online Help system are also available
on the Web site:
www.keysight.com/find/ena
Additional product information
For additional product information, refer to the ENA
brochure available on the Web site:
www.keysight.com/find/ena

Keysight E5071C Specifications

General

Brand	Keysight
Model	E5071C
Category	Measuring Instruments
Language	English