Need help?Do you have a question about the Keysight E5080B and is the answer not in the manual?
General| Number of Ports | 2 or 4 ports |
|---|---|
| Stability | < 0.005 dB/°C (typical) |
| IF Bandwidth | 1 Hz to 30 kHz (in 1-3-10 sequence) |
| Impedance | 50 Ω |
| Connector Type | 3.5 mm |
| Display | 12.1-inch |
| Interface | LAN, USB, GPIB |
| Dimensions | 426 mm |
| Weight | Approx. 15 kg |
| Measurement Types | S-parameters |
| Calibration | TRL |
Explains safety alert terms (Caution, Warning, Note) and general precautions for safe operation.
Covers manufacturer declarations, compliance with directives, and obtaining conformity documents.
Guides on checking shipment, environmental requirements, and ESD protection for proper setup.
Covers power supply, connectivity, fuses, BNC adaptor, and rack mounting procedures.
Details instrument startup, power management, disconnection, and initial system registration.
Provides solutions for common problems encountered during the analyzer's startup process.
Explains how to restore the E5080B to its factory state, including necessary steps and precautions.
To Next Page