EasyManua.ls Logo

Keysight PXA X Series - Page 5

Keysight PXA X Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Note N9030-90036 5
Option CR3, or CRP, or ALV Installation Kit
Tools Required for Installation
Personal computer with internet access and USB port
USB storage device with > 2 GB free memory
Tools Required for Manual Operation Verification
For Option CR3 and CRP
Spectrum Analyzer capable of measuring a 322.5 MHz signal at -40 dBm
Test cable, sma or 3.5 mm connectors
Adapters as needed to connect the cable between the spectrum analyzer and sma AUX IF OUT
port on the rear panel of the N9030A
For Option ALV
Signal source capable of providing pulse output above 200 MHz
Oscilloscope
Test cable, BNC
BNC (f) to sma (m) adapter to connect the cable between the oscilloscope and sma AUX IF OUT
port on the rear panel of the spectrum analyzer

Other manuals for Keysight PXA X Series

Related product manuals