Keysight PXA X Series - Utilities, Adjustments, and Performance Verification Tests

10 Installation Note N9030-90036
Option CR3, or CRP, or ALV Installation Kit
Utilities, Adjustments, and Performance Verification Tests
Calibration Software and specified test equipment is required to perform the adjustments, and can be
used to automate the performance verification testing. Information on how to obtain this software can
be found at
http://www.agilent.com/find/calibrationsoftware
Utilities Required
None
Adjustments Required
None
Performance Testing Required
None
A full calibration is required to assure the instrument meets all specifications
The end user must ultimately determine whether they want a full calibration to be performed after the
installation of this upgrade or not. If a full calibration is required, arrangements regarding the level of
calibration must be made between the end user and the calibration provider.
For assistance, contact your nearest Agilent Technologies Sales and Service Office. To find your local
Agilent office access the following URL, or if in the United States, call the following telephone
number:
http://www.agilent.com/find/assist
1-800-829-4444 (8 am - 8 pm ET, Monday - Friday)