1 Calibration Procedures
26 Keysight U1270 Series Service Guide
Performance Verification Tests
Use the performance verification tests to verify the measurement performance of
the instrument. The performance verification tests use the instrument's
specifications listed in the U1271A/U1272A User's Guide and the U1273A/
U1273AX User’s Guide (available for download at www.keysight.com/find/
hhTechLib).
The performance verification tests are recommended as acceptance tests when
you first receive the instrument. The acceptance test results should be compared
against the 1 year test limits. After acceptance, you should repeat the
performance verification tests at every calibration interval.
If the instrument fails the performance verification tests, adjustment or repair is
required.
Ensure that you have read the “Test Considerations” on page 25 before running
the performance verification tests.
To Next Page
Loading...
