16 Keysight U1271A/U1272A Quick Start Guide
16 Keysight U1271A/U1272A Quick Start Guide
ENGLISH
– will be indicated briefly on the secondary
display along with a brief beep if the diode is
found to be in good condition. is shown if
the diode is out of the thresholds.
Capacitance measurements
Set up your multimeter as shown in the figure
below to perform capacitance measurements.
is shown on the bottom left of the display when
the capacitor is charging, and is shown when the
capacitor is discharging.
To Next Page
Loading...
