Keysight U8903B - Page 8

8 Keysight U8903B Configuration Guide
Step 3: Select accessories options
Step 4: Select warranty options
Table 1-5 Accessories options
Option number Description Additional information
U8903A-101 Male BNC to male BNC cable, 1.2 m –
U8903A-102 Male BNC to male RCA cable, 2 m –
U8903A-103 Male XLR to female XLR cable 2 m –
U8903B-105 Digital serial interface cable –
U8903A-107
Cable, accessory – Male XLR – 2 male
BNC analyzer, 0.26 m
This is for the analyzer input to convert the balanced
measurement from HP 8903B. For more information, refer
to the Migrating Balanced Measurements from HP 8903B
to Keysight U8903A Audio Analyzer application note
(http://literature.cdn.keysight.com/litweb/pdf/
5991-0435EN.pdf)
U8903A-108
Cable, accessory – Female XLR – 2 male
BNC generator, 0.26 m
This is for the generator output to convert the balanced
measurement from HP 8903B. For more information, refer
to the Migrating Balanced Measurements from HP 8903B
to Keysight U8903A Audio Analyzer application note
(http://literature.cdn.keysight.com/litweb/pdf/
5991-0435EN.pdf)
U8903A-109 BNC accessory kit
The kit consists of a BNC socket, a custom threaded metal
sleeve, and a BNC plug with a custom center pin. The kit
can be used to make an in-line BNC component containing
any combination of passive components the user wishes to
connect between the input and the output.
U8903A-908 Rackmount kit 132.6H without handle
Table 1-6 Warranty options
Option number Description Additional information
R-51B-001-Z Warranty 3 years; Return to Keysight 3 years warranty is included at no additional charge.
R-51B-001-5Z
Warranty Assurance Plan 5 years;
Return to Keysight
–