Kia Cadenza 2014 - Windshield Wipers & Washers; LCD Display Controls and Modes

CADENZA FEATURES & FUNCTIONS GUIDE
12
*IF EQUIPPED
STEERING WHEEL CONTROLS
LCD Display Controls and Modes*
Press Mode/Select button
A
to scroll through
differerent LCD Modes:
A
(LCD Display Control button
located on Steering Wheel)
Type A Type B
Trip Computer Mode: Displays driving
information for tripmeter, fuel economy, etc.
A/V Mode: Displays the state of the A/V
System
Turn-by-Turn Mode*: Displays the state of
the Navigation system
Information Modes: Informs on upcoming
service intervals
User Settings Mode: Change settings of the
doors, lamps and other features
Smart Cruise Control (SCC) / Lane
Departure Warning System (LDWS)*:
Displays the state of the SCC and LDWS
Auto Rain Sensing*
The rain sensor located on the upper end of the
windshield glass senses the amount of rainfall and
controls the wiping cycle for the proper interval. The
more it rains, the faster the wiper operates. When the
rain stops, the wiper stops.
To adjust the Auto Rain Sensing speed setting, move the
speed control switch
A
up/down.
•
• With the Engine Start/Stop button in the ON position and the
wiper switch is in AUTO mode, the wiper will operate once to
perform a self-check of the system
• Set the wiper to OFF position when the wiper is not in use
QUICK TIPS
Windshield Wipers & Washers
MIST: Single wipe
OFF: Wiper off
LO: Slow wipe
AUTO*: Auto
Control wipe
HI: Fast wipe
INT*: Intermittent
wipe
Move lever Up/Down to change Wiper modes.
Pull to spray and wipe.
Faster
Slower
A
LCD display modes: