23
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
CENTER PANEL
AUTO HOLD*
AUTO HOLD temporarily maintains the vehicle at a standstill even if the brake
pedal is released. AUTO HOLD can be turned ON/OFF using the AUTO HOLD
switch
B
on the driver’s panel. Before AUTO HOLD will operate, the driver’s door,
engine hood and trunk must be closed and the driver’s seat belt must be fastened.
The AUTO HOLD indicator, which is in the instrument cluster, has four states:
White: Standby - With vehicle at a standstill, and AUTO HOLD switch
B
turned
ON, the indicator will illuminate white. While driving the vehicle (vehicle is not at a
standstill), the AUTO HOLD indicator will remain white.
Green: Engaged - When coming to a complete stop by depressing the brake pedal,
the AUTO HOLD indicator changes from white to green.
OFF (not illuminated): The indicator will turn OFF when the AUTO HOLD switch
B
is manually turned OFF or when the EPB is manually turned ON.
Yellow: Malfunction - When the indicator is illuminated yellow, there may be a system
malfunction. Take your vehicle to a local Kia dealer.
Electric Parking Brake
(EPB) / Auto Hold Video
To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
www.KuTechVideos.com/vg13/2014
QR CODE
To Next Page
Loading...
