5
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
INSTRUMENT CLUSTERINSTRUMENT CLUSTER / DRIVER’S PANEL
Kia Tire Pressure
Monitoring System Video
To view a video on your
mobile device, snap this
QR code or visit the listed
website.
Refer to page 2 for more
information.
Tire Pressure Monitoring System (TPMS)
REMINDER: Consult your dealer for service if Low Tire Pressure Light remains illuminated after inflating your tire(s).
www.KuTechVideos.com/vg13/2014
The indicator functions as both Low Tire Pressure Light and TPMS Malfunction
Indicator.
The TPMS indicator will illuminate if one or more tires is significantly underinflated, the vehicle
has a spare tire installed without TPMS or the outside temperature becomes significantly colder.
• Inflate tire(s) to specifications to turn off Low Tire Pressure Light by using an accurate
digital tire pressure gauge. See front driver’s door jamb for PSI specification
• The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute
when there is a problem with the TPMS. See dealer for service
•
• Even with TPMS, tire pressure should be checked manually at least once a month. Only adjust Tire Pressure
on “cold tires”
• For proper maintenance, safety, and optimal fuel economy, maintain recommended tire inflation pressures
and stay within the load limits and weight distribution recommended for your vehicle
• In winter or cold weather, the TPMS light may illuminate if the tire pressure was adjusted to the
recommended tire inflation pressure during warm weather
QUICK TIPS
QR CODE
Driver Position Memory System*
The integrated system stores into memory the position of the Driver’s Seat, Outside
Rearview Mirrors and the Steering Wheel.
To store positions into memory, first place the Gear Shift into P (Park) while the Engine Start/
Stop button is in the ON position. Then:
1. Adjust the Driver’s Seat, Outside Mirrors and the Steering Wheel
2. Press the Memory button
A
on the control panel. System will beep once
3. Press one of the memory buttons
B
within 5 seconds. The system will beep twice when
memory has been stored
A
B
To Next Page
Loading...
