Features of your vehicle
1204
Static bending light (if equipped)
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
• When vehicle speed is under 10km/h
and steering wheel angle approximate-
ly 80 degrees.
• When vehicle speed is over 10km/h
and steering wheel angle approximate-
ly 35 degrees.
• When the vehicle is at a standstill.
• When moving rearwards with one of
the above conditions satisfied the lights
will light up the opposite direction.
Lighting control
The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at the
end of the control lever to one of the fol-
lowing positions:
(1) OFF position
(2) Position light position
(3) Headlight position
(4) Auto light position (if equipped)
Position light position ( )
When the light switch is in the position
light position, the tail, position, license
and instrument panel lights are ON.
OED040045 OED040046
To Next Page
Loading...
Need help?
General
