781
Maintenance
5. Pull out the front bumper cover.
6. Loosen the retaining bolt .
7. Pull out the headlight assembly from
the body of the vehicle.
Headlight (High, 1) and static bending
light (2, if equipped)
Follow the steps 1 to 7 from the previous
chapter.
8. Remove the cover by turning it coun-
terclockwise.
9. Disconnect the headlight bulb socket-
connector.
10. Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
11. Remove the bulb from the headlight
assembly.
12. Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
OJD072041OJD072056
OJD075055
OJD075062
Diesel only
To Next Page
Loading...
