What to do in an emergency
6
6-27
Jack label
1.Model Name
2.Maximum allowable load
3.When using the jack, set your park-
ing brake.
4.When using the jack, stop the
engine.
5.Do not get under a vehicle that is
supported by a jack.
6.The designated locations under
the frame
7.When supporting the vehicle, the
base plate of jack must be vertical
under the lifting point.
8.Shift into Reverse gear on vehicles
with manual transmission or move
the shift lever to the P position on
vehicles with automatic transmis-
sion.
9.The jack should be used on firm
level ground.
10.Jack manufacturer
11.Production date
12.Representative company and
address
❈The actual Jack label in the vehicle may differ from the illustration. For more
detailed specifications, refer to the label attached to the jack.
OHYK064001
OHYK065005
■ Type A
■ Example
■ Type B
OHYK064002
■ Type C
To Next Page
Loading...
