3-28
Seat and safety features of your vehicle
• Pre-tensioners are designed to
operate only one time. After activa-
tion, pre-tensioner seat belts must
be replaced. All seat belts, of any
type, should always be replaced
after they have been worn during a
collision.
• Do not attempt to inspect or
replace the pre-tensioner seat
belts yourself. This must be done
by an authorized Kia Premium
dealer.
• Do not strike the pre-tensioner seat
belt assemblies.
• Do not attempt to service or repair
the pre-tensioner seat belt system
in any manner.
Pre-Safe Seat belt (PSB)
(if equipped)
The pre-safe seat belt activates only
when the passenger is wearing
his/her seatbelt. It will activate and
pull the seat belt into tighter contact
against the occupant's body if a colli-
sion is detected or during certain
driving maneuvers.
OKH033116N
Hot Pre-tensioner
Do not touch the pre-tensioner
seat belt assemblies for several
minutes after they have been
activated. When the pre-tension-
er seat belt mechanism fires dur-
ing a collision the pretensioner
becomes hot and can burn you.
WARNING
The pre-safe seat belt activates
only when the passenger is
wearing his/her seat belt.
CAUTION
To Next Page
Loading...
