4-43
BACK WARNING SYSTEM
(IF EQUIPPED)
This system features four supersonic sensors in
the rear bumper, which measure the distance to
the nearest object in order to warn the driver (via a
warning signal) when the object approaches the
rear of the vehicle.
This system will activate when the back-up light
comes on and the ignition switch is in the "ON"
position. The warning signal has three distinct
alerts. The 1st alert beeps intermittently, the 2nd
beeps a little faster and 3rd beeps continuously. If
you hear an audible warning sound when shifting
gears to "R" position, this does not indicate a
system malfunction, it is merely a sign that the
Back Warning System is operating normally.
CBGQ0202
Sensor
✽✽
NOTICE
• The Back Warning System should only be
considered as a supplementary safety
device. The driver must always check the
rear view when backing up.
• The audible warning signal can differ
depending on the type of objects detected by
the sensor(s).
• The audible warning signal might not acti-
vate if one or more of the sensors is frozen
or caked with dirt or mud.
Sedona USA 4.qxd 5/10/2005 10:24 AM Page 43
To Next Page
Loading...
