Driving Your Vehicle
4-78
How to cancel forced outside (fresh) air posi-
tion in floor, floor-defrost and defrost position
(Type A) ;
When you select the Floor, Floor-Defrost or
Defrost position, the outside (fresh) air position will
be selected.
If you don’t want outside (fresh) air position when
operating in either of these modes you can turn off
the forced outside (fresh) air position by performing
the following:
1. Turn the ignition switch to the “ON” position.
2. Turn the fan speed control knob to the “0” posi-
tion.
3. Turn the mode selection knob to the defrost
position
().
4. Push the air intake control button
()at least
5 times within 3 seconds.
Then the indicator light in the air intake control
button will blink 3 times with 0.5 second of inter-
val.
If you want to return to the forced outside (fresh) air
position, repeat the same procedure.
1
2
3
4
FRONT
MAX
A/C
4GQN406
Sedona USA 4.qxd 5/10/2005 10:24 AM Page 78