For mixture percentage, refer to the following table
Maintenance
7-22
CAUTION
To prevent burning yourself, do not remove the
radiator cap or loosen the drain plug while the
engine is hot.
Changing Coolant
Change coolant according to the Scheduled
Maintenance.
• Use only soft (de-mineralized) water in the
coolant mixture.
• The engine in your vehicle has aluminum engine
parts and must be protected by an ethylene-
glycol-based coolant to prevent corrosion and
freezing.
• DO NOT USE alcohol or methanol antifreeze or
mix them with the specified coolant.
• Do not use a solution that contains more than
60% antifreeze or less than 35% antifreeze,
which would reduce the effectiveness of the
solution.
Ambient temperature
Mixture percentage
(volume)
Coolant
solution
Water
5°F (-15°C)
35 65
-13°F (-25°C)
40 60
-31°F (-35°C)
50 50
-49°F (-45°C)
60 40
To Next Page
Loading...
