6. Pull the folding loop out of the pocket located
under the rear seat cushion.
7. Lift the entire folded seat forward and place the
hook over the headrest pole at the 2nd row seat.
To unfold the rear seat for passenger use:
1. Remove the folding loop hook from the headrest
pole.
2. Insert the folding loop into the pocket.
3. Lift the rear portion of the seat cushion then
push down firmly to lock the catches into the rear
anchors until an audible “click” is heard.
4. Make sure the catches are locked in position by
moving the seat forward and backward or lifting
the rear portion of the seat. If the seat moves, it
is not locked properly.
5. Push the seatbacks to an upright and locked
position.
Knowing Your Vehicle
3-38
CGQ03117
To Next Page
Loading...
