Kia Sedona 2005 - Page 76

3-67
Installing a Child Restraint seat ;
1. Position the child restraint seat on the rear
passenger seat cushion.
2. Route the child restraint seat tether strap over
the back of the seat.
For vehicles with adjustable head restraints,
route the tether strap under the head restraint
and between the head restraint posts, otherwise
route the tether strap over the top of the seat-
back.
3. Locate the correct anchor on the floor behind
the rear seat for the selected seating position.
4. Open the tether anchor cover.
5. Clip the tether strap hook to the tether strap
hook holder.
6. Tighten the tether strap to secure the seat.
WARNING - Child Restraint
Check that the child restraint system is
secure by pushing and pulling it in differ-
ent directions. Incorrectly fitted child
restraints may swing, twist, tip or come
away causing death or injury.
WARNING - Child Restraint
Anchorage
• Child restraint anchorages are designed
to withstand only those loads imposed
by correctly fitted child restraints. Under
no circumstances are they to be used for
adult seat belts or harnesses or for
attaching other items or equipment to
the vehicle.
• The tether strap may not work properly if
attached somewhere other than the
correct tether anchor.