SEDONA FEATURES & FUNCTIONS GUIDE
6
*IF EQUIPPED
Trip Computer / Tripmeter
The Trip Computer is a driver information
system that displays information related
to driving on the display when the ENGINE
START/STOP button is in the ON position.
To cycle through the LCD Instrument Cluster
modes, press the Mode button
A
.
To select and enter Trip Computer mode ,
roll the OK button
B
and then press to enter.
To cycle through and select the different
screens (Fuel Economy, Trip A, Trip B), roll
the OK button
B
and then press enter.
When displaying TRIP A or TRIP B screens,
press and hold the OK button
B
to reset the
Tripmeter to zero.
Press the Return button
C
to go back to the
previous mode/item
(Type B Cluster)
FUEL ECONOMY
• RANGE
• Average MPG
• Instant MPG
TRIP A
• Tripmeter A
• Average MPH
• Elapsed Time (E/T)
TRIP B
• Tripmeter B
• Average MPH
• Elapsed Time (E/T)
DIGITAL SPEED
REMINDERS:
• Appearance of Tripmeter display may differ as
equipped
• All stored driving information (except Odometer and
Range) is reset if the battery is disconnected
LCD Instrument Cluster Modes
Press Mode button
A
to cycle through different LCD Instrument
Cluster Modes:
Trip Computer Mode: Displays driving information
for tripmeter, fuel economy, etc.
A/V Mode: Displays the state of the A/V System
Turn-by-Turn Mode*: Displays the state of the
Navigation system
Information Modes: Informs on service intervals
and pressure status of each tire
User Settings Mode: Change settings of the lamps
and other features
Advanced Smart Cruise Control (ASCC) / Lane
Departure Warning System (LDWS)*: Displays the
state of the ASCC and LDWS
Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Range
Average
0 10 20 30
24.8 MPG
729 mi
N
Hold : Reset
OK
MODE
CRUISE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
(Type B/C; Buttons located on Steering Wheel)
A
B
C
INSTRUMENT CLUSTER