25
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
Your Automatic Climate Control system may differ from those in the illustrations.
See your Owner’s Manual for more details.
Automatic Climate Control* (Continued)
Climate Control Auto Function
1. Press AUTO
B
to select Full Auto Operation. The Auto setting
automatically controls the airflow modes, fan speeds, air intake and
air conditioning according to the temperature setting selected
2. Set desired Temperature
A
3. Press SYNC
E
to select Sync Temperature Control operation, which
synchronizes the passenger’s temperature to the driver’s setting
Defrost Outside Windshield:
1. Set Temperature
A
to Hot
2. Press the Front Defrost button
L
Defog Inside Windshield:
1. Set Front Fan Speed
F
to desired position
2. Set desired Temperature
A
3. Press the Front Defrost button
L
• Defrost Mode activates A/C and opens Fresh Air Vent to help
dehumidify the air and improve Defroster performance
• During Auto Operation, the A/C indicator will NOT illuminate. The fan
speed, air intake, air flow and air conditioning may automatically be
engaged at any time to reach desired temperature and reduce humidity
• Keep inside glass as clean as possible to reduce window fogging
QUICK TIPS
Air Flow Modes
To select Air Flow Modes, press the MODE button
H
to cycle
through to desired mode:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
REMINDERS:
• Pressing any button during AUTO operation will deactivate the AUTO function and switch
to manual mode, except for Temperature Control
• When in AUTO mode, Air Flow Mode and Fan Speed do not display on the
Climate Control Display
• Cold or warm ambient air may flow in through vents if Recirculated Air button is not pressed
ON (LED lit)
CENTER PANEL
To Next Page
Loading...
