Forward Collision-Avoidance Assist (FCA)
9
FCA is designed to help alert the driver and, under certain conditions, apply emergency braking
when rapidly approaching a vehicle that is slowing down, braking, or stopped. Initially, the FCA
provides a Forward Collision Warning (FCW) when it detects a potential collision with a vehicle,
pedestrian, or cyclist in front by emitting an audible warning and a visual alert on the Instrument
Cluster
A
. Junction Turning function*
B
may apply emergency braking to help avoid a collision
with an oncoming vehicle detected in an adjacent lane when turning left at a crossroad with
the turn signal on. Adjust the alert settings (Standard, Late, Off) in either the Instrument Cluster
or audio settings. FCA is ON by default and can be turned OFF in the Vehicle Settings in the
infotainment system or Instrument Cluster settings menu.
If the system detects that the collision risk has increased, FCA can automatically apply the brakes
to reduce your speed, potentially helping to reduce the effects of a possible collision.
FCA/FCW will become active when the:
• Engine Start/Stop button is ON.
• Vehicle is traveling faster than 5 mph.
• Electronic Stability Control (ESC) is ON.
Blind-Spot Collision Warning (BCW)*
9
The BCW system is designed to detect approaching vehicles in the driver’s blind spot areas
and warn the driver of a possible collision with a warning indicator and a warning sound. If
there is a collision risk when exiting a parallel space, BCW can assist by applying the brakes
to help avoid a collision.
To enable/disable in User Settings* in the Instrument Cluster
—
Press the Mode button
A
on
the steering wheel and toggle to User Settings. Press the OK button
B
then toggle up/down
to Driver Assistance > Driving Safety > Blind-spot Safety.
To enable/disable in Vehicle Settings* in the infotainment system
—
Press the SETUP key or the
onscreen SETUP button. Press VEHICLE to enter Vehicle Settings. Select Driver Assistance >
Driving Safety > Blind-spot Safety.
Note: Only adjust settings when the vehicle is at a standstill, gear shift is in PARK, and the
ignition is ON or the Engine Start/Stop button* is in the ON position.
Vehicle detection: When another vehicle is detected within the BCW warning boundary
C
, an
indicator
D
will illuminate on the outside rearview mirrors.
Collision warning: When the vehicle detection warning is on and the driver activates a turn signal,
a flashing indicator
D
will illuminate on the outside rearview mirrors and the system will sound
a warning.
Collision-Avoidance Assist* (while departing): If equipped, when a collision warning has already
occurred, and the BCW detects a collision risk has increased, BCW can help avoid a collision by
applying the brakes. Your vehicle needs to be traveling less than 2 mph, and the approaching
vehicle is traveling less than 3 mph.
Rear Cross-Trafc Collision-Avoidance Assist (RCCA)*
9
If RCCA detects approaching vehicles from the rear-left or rear-right side of the vehicle, the
system will sound an audible warning, the warning indicators on the outside rearview mirrors
will illuminate, and a message will appear on the LCD Instrument Cluster. RCCA may activate
the Electronic Stability Control to help avoid an imminent collision. RCCA may temporarily apply
braking power when an approaching vehicle is detected within a certain distance next to or
behind the vehicle.
RCCA is designed to operate under the following conditions:
• When the gear shift is in Reverse.
• When your vehicle is moving slower than 6 mph.
Smart Cruise Control (SCC) with Stop and Go System*
11
The SCC with Stop and Go System is designed to maintain a speed and predetermined distance
from vehicles detected ahead by automatically adjusting the driving speed as needed. When
traffic is detected, the vehicle can slow down to maintain a set distance behind traffic without
depressing the accelerator or brake pedal.
With SCC on and activated, the vehicle-to-vehicle distance set, and when the system detects a
vehicle slowing or stopping, the system can bring the vehicle to a complete stop. When the vehicle
ahead starts to move forward, the SCC system re-engages. If the vehicle ahead stops for more than
3 seconds, the accelerator pedal or the RES+ button must be pressed to start moving the vehicle.
To set/adjust SCC speed:
• Accelerate/decelerate to the desired speed.
• Press the CRUISE button
A
on the steering wheel to turn the system ON. The CRUISE indicator
will illuminate on the Instrument Cluster.
• Press (SET-) button
B
down to set speed. The SET indicator light will illuminate. The set speed
and vehicle-to-vehicle distance will illuminate on the LCD screen.
• Press (RES+) button
B
up or (SET-) button
B
down to adjust the set speed.
To set the vehicle-to-vehicle distance
C
: Press the SCC button
D
on the steering wheel. The
image on the LCD screen
E
will change when scrolling through the available distance settings.
To cancel SCC operation: Press the CANCEL button
B
or press the brake pedal. The LCD screen
will display a message that the SCC operation is canceled.
To turn the SCC system OFF: Press the CRUISE button
A
.
The CRUISE indicator on the
Instrument Cluster will turn OFF.
Smart Liftgate with Auto Open*
12
The Smart Liftgate with Auto Open can open the Liftgate automatically when the driver approaches or leaves the vehicle. For Smart
Liftgate with Auto Open to operate, the Smart Key must be positioned in the detecting area (20-39 inches/50-100 cm).
The Smart Liftgate with Auto Open feature is OFF by default. To enable on certain models, go to the User Settings in the Instrument
Cluster LCD modes, then select Door > Smart Liftgate. On other models, press the SETUP key on the infotainment system, followed
by pressing Vehicle > Door > Smart Liftgate on the screen.
Automatically open: When the Smart Key is on your person and you are near the back of the vehicle, within close proximity, the
hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Smart Liftgate is about to open. Then the
alert system will blink and chime two additional times before opening the Smart Liftgate.
See your Features and Function Guide for more details.
REMINDER: Above are approximate distances based
on a 56-mph vehicle speed. The SCC vehicle-to-vehicle
distance increments are based on vehicle speed.
172ft130ft
82ft
106ft
60
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
C
(Buttons located on right side of steering wheel)
2.2.
A
B
D
&ROOLVLRQ:DUQLQJ
(Junction Turning)
A
B
03+
'
E
C
C
D
2.2.
(Buttons located on right side of steering wheel)
A
B
To Next Page
Loading...
Need help?
General
